Pressure care mattresses are designed for individuals that are susceptible to, or have developed, pressure ulcers. Pressure ulcers (also known as bed sores) result from sustained pressure applied to the skin, often occurring when a person spends long periods of time in the same position. Individuals most at risk of developing sores are those with restricted mobility and/or poor skin integrity.
In this pressure mattress guide we'll introduce you to the different grades of pressure ulcers and learn about the different types of pressure care mattress and how they apply to different patient needs and risk levels. You will learn how to specify the correct mattress from the Opera® range and we'll point out the key considerations when buying a mattress system.
Pressure ulcers and categorising risk
Pressure ulcers (known also as pressure sores, bed sores, and decubitus ulcers) are areas of skin that have been subjected to sustained amounts of pressure, resulting in the skin and tissue becoming damaged. Constant pressure on a vulnerable area of the body results in the circulation of blood being cut off, which leads to the decay of the affected area. Extended pressure occurs when a person is sat or laid in a particular position on a static surface for a long period of time. There are four grades of ulcer, each denoting the severity of the wound:
Reddening of the skin
Superficial ‘blister-like’ wound
Full thickness skin loss
Deep wound and tissue damage
As a sore is allowed to develop, it moves through the four grades. Different patients have different levels of risk in developing ulcers, factors include mobility, skin integrity and nutrition/wellness. There are three risk categories that denote how at risk the patient is: at risk; high risk; and very high risk. The risk level is determined by measuring the patient’s mobility, skin integrity etc, through assessment tools such as the Waterlow Score.
The different types of pressure relieving surfaces
Static mattresses are made up of a single or multiple pressure relieving foams. They are a static surface and relieve pressure over time by responding to body shape, movement and heat. Castellations and shaped surfaces as well as air pockets are often used to offer additional pressure relief.
For immobile users, it is essential that carers reposition them regularly on the mattress surface (once every two to three hours). A static surface can only relieve so much pressure and sores will develop if the patient is not moved regularly.
Static mattresses are designed to prevent ulcers rather than treat them, however the more sophisticated layered foam mattress can be used to heal grade 1 ulcers as long as there is a turning plan for the user.
Alternating (Dynamic Air)
Alternating pressure mattresses, commonly referred to as air-flow mattresses, relieve and redistribute pressure through a dynamic lying surface. These mattresses are constructed from a row of lateral air cells that constantly alternate, whilst some cells are inflated the others are deflated. Air flow is controlled through a pump unit which connects to the mattress and is usually hooked onto the footboard of the bed the mattress is being used with.
The air cells that are inflated support the user whilst the deflated air cells provide total pressure relief to the skin above them. The air pump then inflates the deflated cells and deflates the inflated cells, ensuring the user’s skin is subjected to movement as well as periods of no pressure.
Alternating pressure mattresses are typically used to help treat developed pressure ulcers and also to prevent ulcers for users that are unable to move themselves. They reduce the need for manual repositioning and provide consistent pressure relief. However, they do present comfort considerations, namely with the moving lying surface and also compressor noise.
Hybrid pressure mattresses combine both alternating and static mattress systems into one mattress. This is usually in the form of alternating air cells inset in a foam mattress surround with a soft foam topper. Hybrid pressure mattresses provide advanced pressure relief that an alternating air pressure mattress brings, whilst still maintaining the high level of comfort found in a static foam pressure mattress.
The majority of hybrid pressure mattresses require a mains-powered air pump to operate the integral alternating air cells. New, innovative technology has also led to non-powered hybrid mattresses that relieve pressure by responding intelligently to body shape and movement. Air cells are self-adjusting through valves that inhale and exhale naturally as pressure is exerted on the mattress surface. See the Opera® Impulse Hybrid Mattress.
Hybrid mattresses are designed for users who are at high or very high risk of developing sores but still have some mobility.
Key purchasing/specifying considerations
Aside from the risk category and type of pressure relieving surface, there are some other key considerations to bear in mind when specifying an Opera® pressure care mattress.
Pressure care mattress are available in two different forms; an overlay system, or a full replacement system.
An overlay system is a shallow depth mattress that is designed to be used on existing mattresses. They are usually about 2-5” in depth, and are laid on top of an existing mattress or underlay.
A full replacement system is a pressure care mattress that is only to be used as a single unit. They have deep air cells that are 6”+ in depth and their more sophisticated construction means they provide greater levels of pressure relief.
All Opera® pressure care mattresses 2000cm/6ft in length and are available in a variety of widths to accommodate different bed sizes, including 90cm/3ft Single, 105cm/3ft6 and 120cm/4ft.
All Opera® pressure care mattresses have a wipe-clean PU cover. They are two-way stretch and vapour-permeable to prevent moisture as well as allow for better microclimate control. On some models, the cover is impregnated with antimicrobial agents ensuring the mattress covers are resistant to bacterial growth including MRSA, fungal growth and house dust mite.
Opera® mattress covers are durable and manufactured to withstand rigorous cleaning practices. 50,000ppm Chlorine resistance resists damage even where Chlorine builds up through multiple cleaning cycles.
Bases on the static mattresses are designed for lighter use and are usually non-slip to minimise mattress movement. For alternating and hybrid systems, the bases are constructed from a tough nylon material that prevents damage to air cells. They also have securing straps to limit movement and/or handling loops to ease transfer of the mattress.
The Opera® range
The Opera® range of pressure care mattresses is split into the three types of pressure relieving surface: static; alternating; and hybrid.
Opera® Static Mattresses
Opera® static mattresses are high-quality everyday pressure care mattresses designed for users who are at risk of developing sores but are able to move themselves or be regularly tuned by a carer.
- Single or layered foam options.
- Castellations ease profiling and relieve pressure.
- High density edging foam eases transfer.
- Firmness ratings help to ensure user comfort.
Opera® Alternating Mattresses
Opera® alternating mattresses are made up of air cells that alternate to redistribute pressure across the user's body. Cells are powered by a pump unit where the users weight, the time cycle and airflow settings can be selected.
- Overlay and full replacement mattress systems
- Low noise pumps for minimal disruption
- Auto-weighing technology on some systems
- Suitable for high and very high risk users
Opera® Hybrid Mattresses
Opera® hybrid mattresses use a combination of foam and air cell technology to provide advanced pressure relief alongside optimal user comfort. Opera's hybrid mattress range consists of both powered and un-powered options, which rely on the users movement to adjust the air cells.
- Enjoy the benefits of both foam and air technology
- Powered and un-powered hybrid mattresses
- Suitable for very high risk users
- Eliminated risk of "bottoming out" during profiling
Find out how Opera could help you with your bed needs.
Contact us, or speak to our experts advisors on 0333 222 8584